How to Thread a Singer Futura
How to thread a Singer sewing machine
Threading a Singer sewing machine might seem like a daunting task at first, but it doesn’t need to be that way. The exact process for threading a Singer machine will vary depending on the model of the machine that you have, so it is always best to check the instruction manual or find more information on the manufacturer’s website if you’ve lost it.
This guide covers how to thread a Singer sewing machine with the Futura configuration. Follow these links for guides on how to thread the Main, Alternate and Curvy configurations.
Quick tips
- Always raise the presser foot lifter before getting started
- Make sure the thread is properly placed in the take-up lever
- Use a spool cap to stop the thread catching on any irregularities on the spool itself. If the machine came with multiple sizes, use the spool cap that most closely fits the thread spool.
- Always make sure that you are using the correct size and type of needle for your fabric. The wrong needle could cause the thread to shred or break apart.
Threading a Singer - Futura Configuration
Step A
Raise the presser foot lifter. If the presser foot lifter is not raised, correct thread tension cannot be obtained.
Step B
Turn the hand wheel towards you until the needle is in its highest position and you can see the thread take-up.
Step C
Thread the machine in the following order:
- Guide the thread through the thread guide (1), and then pull it down along the groove
- Do a U-turn around the inside of the tab (2)
- Pass the thread through the thread take-up (3) from right to left
- Insert the thread into the inside of the groove (4)
- Guide the thread into the thread guide (5)
- Pass the thread through the eye of the needle (6) from front to back
Item Successfully Added